Meshtastic App/com.geeksville.mesh/[androidJvm]ConfigProtos/Config/PowerConfig

PowerConfig

class PowerConfig : GeneratedMessage, ConfigProtos.Config.PowerConfigOrBuilder


Power Config\
See [Power Config](/docs/settings/config/power) for additional power config details.

Protobuf type meshtastic.Config.PowerConfig

Types

Builder

class Builder : GeneratedMessage.Builder<BuilderT> , ConfigProtos.Config.PowerConfigOrBuilder


Power Config\
See [Power Config](/docs/settings/config/power) for additional power config details.

Protobuf type meshtastic.Config.PowerConfig

Properties

ADC_MULTIPLIER_OVERRIDE_FIELD_NUMBER

val ADC_MULTIPLIER_OVERRIDE_FIELD_NUMBER: Int = 3

DEVICE_BATTERY_INA_ADDRESS_FIELD_NUMBER

val DEVICE_BATTERY_INA_ADDRESS_FIELD_NUMBER: Int = 9

IS_POWER_SAVING_FIELD_NUMBER

val IS_POWER_SAVING_FIELD_NUMBER: Int = 1

LS_SECS_FIELD_NUMBER

val LS_SECS_FIELD_NUMBER: Int = 7

MIN_WAKE_SECS_FIELD_NUMBER

val MIN_WAKE_SECS_FIELD_NUMBER: Int = 8

ON_BATTERY_SHUTDOWN_AFTER_SECS_FIELD_NUMBER

val ON_BATTERY_SHUTDOWN_AFTER_SECS_FIELD_NUMBER: Int = 2

POWERMON_ENABLES_FIELD_NUMBER

val POWERMON_ENABLES_FIELD_NUMBER: Int = 32

SDS_SECS_FIELD_NUMBER

val SDS_SECS_FIELD_NUMBER: Int = 6

WAIT_BLUETOOTH_SECS_FIELD_NUMBER

val WAIT_BLUETOOTH_SECS_FIELD_NUMBER: Int = 4

Functions

copy

inline fun ConfigProtos.Config.PowerConfig.copy(block: ConfigKt.PowerConfigKt.Dsl.() -> Unit): ConfigProtos.Config.PowerConfig

equals

open fun equals(obj: Any): Boolean

getAdcMultiplierOverride

open fun getAdcMultiplierOverride(): Float


Ratio of voltage divider for battery pin eg. 3.20 (R1=100k, R2=220k)
Overrides the ADC_MULTIPLIER defined in variant for battery voltage calculation.
https://meshtastic.org/docs/configuration/radio/power/#adc-multiplier-override
Should be set to floating point value between 2 and 6

float adc_multiplier_override = 3;

getDefaultInstance

open fun getDefaultInstance(): ConfigProtos.Config.PowerConfig

getDefaultInstanceForType

open fun getDefaultInstanceForType(): ConfigProtos.Config.PowerConfig

getDescriptor

fun getDescriptor(): Descriptors.Descriptor

getDeviceBatteryInaAddress

open fun getDeviceBatteryInaAddress(): Int


I2C address of INA_2XX to use for reading device battery voltage

uint32 device_battery_ina_address = 9;

getIsPowerSaving

open fun getIsPowerSaving(): Boolean


Description: Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio.
Don't use this setting if you want to use your device with the phone apps or are using a device without a user button.
Technical Details: Works for ESP32 devices and NRF52 devices in the Sensor or Tracker roles

bool is_power_saving = 1;

getLsSecs

open fun getLsSecs(): Int


Description: In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on
Technical Details: ESP32 Only 0 for default of 300

uint32 ls_secs = 7;

getMinWakeSecs

open fun getMinWakeSecs(): Int


Description: While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value
Technical Details: ESP32 Only 0 for default of 10 seconds

uint32 min_wake_secs = 8;

getOnBatteryShutdownAfterSecs

open fun getOnBatteryShutdownAfterSecs(): Int


Description: If non-zero, the device will fully power off this many seconds after external power is removed.

uint32 on_battery_shutdown_after_secs = 2;

getParserForType

open fun getParserForType(): Parser<ConfigProtos.Config.PowerConfig>

getPowermonEnables

open fun getPowermonEnables(): Long


If non-zero, we want powermon log outputs.  With the particular (bitfield) sources enabled.
Note: we picked an ID of 32 so that lower more efficient IDs can be used for more frequently used options.

uint64 powermon_enables = 32;

getSdsSecs

open fun getSdsSecs(): Int


Super Deep Sleep Seconds
While in Light Sleep if mesh_sds_timeout_secs is exceeded we will lower into super deep sleep
for this value (default 1 year) or a button press
0 for default of one year

uint32 sds_secs = 6;

getSerializedSize

open fun getSerializedSize(): Int

getWaitBluetoothSecs

open fun getWaitBluetoothSecs(): Int


Description: The number of seconds for to wait before turning off BLE in No Bluetooth states
Technical Details: ESP32 Only 0 for default of 1 minute

uint32 wait_bluetooth_secs = 4;

hashCode

open fun hashCode(): Int

isInitialized

fun isInitialized(): Boolean

newBuilder

open fun newBuilder(): ConfigProtos.Config.PowerConfig.Builder

open fun newBuilder(prototype: ConfigProtos.Config.PowerConfig): ConfigProtos.Config.PowerConfig.Builder

newBuilderForType

open fun newBuilderForType(): ConfigProtos.Config.PowerConfig.Builder

parseDelimitedFrom

open fun parseDelimitedFrom(input: InputStream): ConfigProtos.Config.PowerConfig

open fun parseDelimitedFrom(input: InputStream, extensionRegistry: ExtensionRegistryLite): ConfigProtos.Config.PowerConfig

parseFrom

open fun parseFrom(data: Array<Byte>): ConfigProtos.Config.PowerConfig

open fun parseFrom(data: ByteString): ConfigProtos.Config.PowerConfig

open fun parseFrom(input: CodedInputStream): ConfigProtos.Config.PowerConfig

open fun parseFrom(input: InputStream): ConfigProtos.Config.PowerConfig

open fun parseFrom(data: ByteBuffer): ConfigProtos.Config.PowerConfig

open fun parseFrom(data: Array<Byte>, extensionRegistry: ExtensionRegistryLite): ConfigProtos.Config.PowerConfig

open fun parseFrom(data: ByteString, extensionRegistry: ExtensionRegistryLite): ConfigProtos.Config.PowerConfig

open fun parseFrom(input: CodedInputStream, extensionRegistry: ExtensionRegistryLite): ConfigProtos.Config.PowerConfig

open fun parseFrom(input: InputStream, extensionRegistry: ExtensionRegistryLite): ConfigProtos.Config.PowerConfig

open fun parseFrom(data: ByteBuffer, extensionRegistry: ExtensionRegistryLite): ConfigProtos.Config.PowerConfig

parser

open fun parser(): Parser<ConfigProtos.Config.PowerConfig>

toBuilder

open fun toBuilder(): ConfigProtos.Config.PowerConfig.Builder

writeTo

open fun writeTo(output: CodedOutputStream)